Showing posts with label patterns. Show all posts
Showing posts with label patterns. Show all posts

28 Oct 2013

Peas-in-a-Pod

Sunday was the annual general meeting (AGM) of the Arts and Crafts Guild, KL and Selangor and this year is also the 20th year since the guild was formed.  We had a short celebration after the AGM with cupcakes for a 'birthday' cake and a gift exchange.

I did not have much time to make anything elaborate, so I made this bracelet.

Before I write more about the bracelet, this is what I received in return, a business card holder decorated with a hand-drawn butterfly on the cover by the artist Cheah Wai Seng.  Click on the name and browse through his gallery for more of his creative work.


Back to the bracelet.

It was a quick tat since I used a rather thick thread.  The label says it is a size 20 but it feels like size 10.  The beads that I used are 8mm, but I suppose the size can be different according to the thread that you use.

I did a quick chart of it before wrapping the gift for the exchange.


This the full-length instructions for it.

  1. Begin with R(6 sp 6); sp = small picot.
  2. RW, C(6)
  3. RW, R(3 lp 3); lp = long picot for the bead.  You can make a beaded picot at this time and hold the bead in place with a paper clip as you tat the rest of the bracelet.
  4. RW, C(6)
  5. Repeat steps 1 to 4 for the length of the bracelet that you are making, ending with the ring,  R1(6 sp 6)
  6. RW, C(9 + [to sp of last ring])
  7. C(6)
  8. RW, R(3 +[ beaded picot of opposite ring] 3)
  9. RW, C(6 +[sp of big ring] 6)
  10. Repeat steps 8 and 9 until the end of the bracelet, ending with a lock join to the small picot of the first big ring.
  11. C(9+[to the base of the big ring])
  12. C(7 +[space at base of small ring])
  13. C(12+[space at base of next small ring]).  Repeat this until the small ring at the other end of the bracelet.
  14. C(7 +[space at the base of the big ring] 6+[to the bracelet clasp] 6+[small picot of big ring])
  15. C(7)
  16. Repeat step 13, ending with a join to the base of the last small ring.
  17. C(7+[to the top of the first big ring] 6)
  18. Do not reverse, make a SLT, R(3 +[attach to the other half of the bracelet clasp] 3)
  19. Do not reverse, maka a SLT again, C(6 +[ space at the base of big ring])
  20. Cut and tie to the top of the next big ring and hide ends.  
If you notice any mistakes in the instructions as you tat, please let me know so I can make corrections.  I don't have the bracelet with me anymore to refer to as I write this pattern.


17 Jan 2013

Johar - pattern ready

The pattern for Johar is ready.  I tatted it again with a solid colour and I think the design shows up better that  the first version in variegated colour.

This was tatted with Omega size 20. I am not very fond of this thread since it is 3-ply and it tend to fuzz up after a while.  I use it mostly to test my designs.

The pattern is now available for download here.
If you get a message that my bandwidth has exceeded, please try again another time.  The site is asking me to upgrade, which I have not considered since I don't really utilise all the other facilities offered there, not yet anyway.

Status of  Doily #3.
I cut off 2-and-half rounds from it because I can't stand looking at how it is curving in some parts.  Have started on a new design to replace the parts that I cut off, (will put up a picture later).  As I have said earlier, I am not comfortable releasing a pattern that I am not happy with, even though it may be corrected by blocking and such.  I feel like I am cheating the other tatters, hoping that someone will be able to get it right somehow.

5 Sept 2012

Toshti - tatting with doodad

Here is the chart for Toshti.  I have not tatted this with an actual doodad myself, but I see no reason to change anything in it after such lovely tatting from Fox and Diane.  Since I have not tatted it, there is no picture of the tatting, only the chart.  You can refer to Fox's and Diane's version of this from the links that I have given,

I will however, tweak Diane's revised version slightly to adjust for the different placement of the doodad.  To do that, I will have to wait for my doodads to arrive.
I want to thank Fox for the creative name given to this design.  Assigning names to motif and designs is something I am not good at.

On another note, the Oxford English Dictionary (OED) have added some new words reflecting current trends and usage in the cyber-world, words such as OMG, LOL, IMHO and BFF.  For example, this is the definition of LOL from the OED.  Out of curiosity, I typed in "doodad" in the search box and this definition of doodad came up.  Maybe, some day tatting can take ownership of this word and make it specific, just saying, :)

19 Jul 2011

For those unlucky in the draw - Rose Window

For those whose names were not drawn for the book give away, I hope this will make you happy.
Rose Window
This is the design shown in the top left corner of my header, partially hidden under the shuttles.  I had planned to include this in the book Elegant Tatting Gems, but I utilised a split ring to jump out of a round.  Somehow, that does not fit in with the theme of the book.

The name, Rose Window, was chosen because another tatter, Antiquarian if I recall correctly, had commented that it looks like a rose window. 

The pattern for the Rose Window is downloadable from here.
Now there are no losers.

15 Nov 2010

Merriment Doily/Coaster

Here is my pattern for this year's holiday Tatting.

I chose the name Merriment because it is an easy and fun pattern to make.
The pattern is downloadable from this link, Merriment Doily/Coaster.

I tatted the model in size 30 thread and the finished size is 11.5cm across or 4.5 inches.
At first glance, it appears that two shuttles are required.  But, you can also do it with shuttle and ball. I wrote something about this in a much earlier post, here.

I started on another piece of this doily in two shades, solid and variegated, of size #40 thread.  The finished size is 10cm across or 4 inches.
Thread used are Lizbeth #40, 623 solid and 127 variegated

Enjoy!

5 Aug 2010

Two by Two - Bookmark pattern

The new school season has started for most countries in the  northern hemisphere.  To mark the event, I am sharing with a new bookmark pattern named Two-by-Two.


You can download the pdf file from here.

24 Feb 2010

Dragonfly and Swan - chart ready

The chart for the dragonfly and swan that I showed in my previous post are ready. 

Click on the tab for 'Free Tatting Patterns' at the top of the page for the link.

11 Feb 2010

Enchanter

This years valentine heart is 
Enchanter


The pattern for Enchanter is available in pdf file from here.

10 Feb 2010

Enchanter

My Valentine gift to you this year 


I know there are still a few days more, but if you are still searching for hearts to tat, you may want to try this.
The chart is below
 
Load two shuttles CTM.
Begin with the dimpled ring (DR) in the centre of the heart with the stitch count of
DR(7-7-7sp7+[to the sp]7-7-7)
Then, make a split ring SR(2-2-2-2/2-2-2-2).
Rotate work so that the dimpled ring is now pointing downwards.
R(6-6)
Switch Shuttle (SS), C(12) and reverse work (rw).
R(4-4+[to the first picot of the DR]4-4), rw.
C(10), rw.
R(4-4+[to the 2nd picot of the DR]8), rw.
C(2-2-2-2-2-2-2-2), rw.
R(8+[to the picot of the DR joined earlier]4-4), rw.
C(8), rw.
R(4+[to the sp join of the DR]4), rw.
C(8), rw.
R(4-4+[to the 4th picot of the DR]8), rw.
C(2-2-2-2-2-2-2-2), rw.
R(8+[to the picot of the DR joined earlier]4-4), rw.
C(10), rw.
R(4-4+[to the last picot of the DR]4-4), rw.
C(12)
Leave a tail of about four inches of thread from each shuttle before cutting.  Tie the ends to the space between the split ring and the floating ring.
Tie the ends into a bow. Isn't that great - no ends to hide.

29 Jan 2010

Jar cover/Coaster


This design was first shared on the Tatting Pattern Calendar blog organised by Ruth Perry.
It is one design which can be used in two ways, as a jar cover or a coaster.

Click on the link, Jar Cover/Coaster for the pdf file of the pattern.

Jarcover/Coaster

This design was first shared on the Tatting Pattern Calendar blog organised by Ruth Perry.
It is one design which can be used in two ways, as a jar cover or a coaster.


The chart for the Jar Cover is below. The blue rings are SCMR (self-closing mock rings) with thrown rings (in yellow) in alternate SCMRs


11 Jul 2009

Magic Moment Snowflake

Magic Moment
that is the name that I've given to this snowflake.


And to add some fun to it, I have decided to give this snowflake to one of the commenters from the earlier post. 18 wonderful people have left comments and I am picking the 10th name from the list that has been jumbled up by the list radomiser in random.org.

The lucky person picked is ..... Diane, the lace-loving librarian.

Diane, I already have your address. It will be on your way soon.

For the rest who are not so lucky this time, you can tat this Magic Moment yourself. Follow the link to my Patterns Page to get the pattern.

20 Jun 2009

Wish Me Luck

After thinking about it for a while, I decided to take the plunge and start selling my tatting on etsy. All are welcome to visit my store, mytatter.etsy.com. There aren't many things there yet.

The latest listing is a set of tatting pattern made up of a medallion, a bookmark, a snowflake and an edging. I am putting them up as a set because they are made from one basic pattern. Here is a snapshot of them together.


Wish me luck on this new venture.

9 May 2009

Mother's Day Heart

This is my gift for all mothers and children of mothers around the world.



You may find the pattern for this heart in here.

Happy Mother's Day

16 Dec 2008

A present for You

Since it is the season for giving, I have a present for readers of my blog,the pattern for this snowflake, which I call 'Quantiesque'.

The pattern is available in my Patterns Page. There is an explanation there on why I name the snowflake Quantiesque.

17 Nov 2008

New Pattern Added

The pattern for the mat/runner blogged about here has been added to my Patterns Page.

5 Oct 2008

Pattern for the Purple Star

It didn't take as long as I had thought to draw the chart for the Purple Star. It is now posted in my Patterns Page. Of course, it will not be a purple star if tatted with different shades of thread.

8 Aug 2008

Daisy Picot Snowflake



Click here for the instructions on how to make daisy picots.


Wind two shuttle with different colour thread for each shuttle.

The centre Daisy - 6 rings altogether.

R(5-3-2-2-3-5). You can make the centre picot slightly bigger for decorative purposes.
R(5+3-2-2-3-5), joining to the last picot of the previous ring.
The last ring is joined to the previous ring and also to the first ring with the folded join.

Round 1
R1(6+6), joining to the 3rd free picot of any of the rings in the centre daisy.
R2(6+6), joining to the 1st free picot of the next ring of the centre daisy.
Reverse work.

Make a chain C(2-2-2-2-2-2-2-2) Do not reverse.

(*)Now make the daisy picots with 3 petals, where each petal is (5-5) and 2ds between each petal.

Close the ring, do not reverse and repeat the chain.

Reverse work and repeat the two rings of R(6+6), joining the 1st ring to the 3rd free picot of the previous ring and the 2nd ring to the 1st free picot of the next ring of the centre daisy.

Reverse work and repeat the chain (2+2-2-2-2-2-2-2), joining to the last picot of the previous chain.

Repeat from (*) to complete the snowflake.

Rings only Snowflake with Beads


R = ring
SR = Split ring
+ = join
sp = small picot
C = Chain
o = beaded picot
RW = reverse work
DNR = Do Not Reverse
SS = Switch Shuttle

String 43 beads onto Shuttle 1, and 7 beads onto Shuttle 2. I would normally add a few beads extra on each shuttle - just to be safe.

Sh 1:
R1(4 o 4sp4 o 4) cl R, DNR

The next step between (* - * )describes the self-closing-mock-ring (SCMR)
(*) Using Shuttle 2;
- C(4 o 2), SS
- R2(5 o 5), cl R and SS
- C(2 o 2), SS
- R3(5 o 5), cl R and SS
- C(2 o 2), SS
- R4(5 o 5) cl R and SS
- C(2 o 4) (*)
Close the SCMR
Sh 1:
SR5(4 o 4/4 o 4)
Repeat (* -*) for the next point of the snowflake, joining R2 to picot of R4 instead of adding the bead to the picot.
Make three more repeats .

For the last repeat, join the SCMR to the to the sp of R1 to complete the motif.



31 Jul 2008

Bookmark with Overlapping Chains

Uses Shuttle and ball Round 1 There are no joins in this round except for where the last chain is joined to the base of the first ring. Begin with R(4-4-4-4), RW followed by chain C(8-8). Repeat these two steps for the length of the bookmark that you need and make the end as follows;
  • After the last ring of one side of the bookmark, make C(4), RW followed by R(4-4-4-4). RW again and make C(4).
Make the second side as the first and repeat the opposite end, ending with C(4). Cut off the thread. Arrange the chains so that the first row chains overlap the second row chains. When you have made the overlaps in the chains, join the last chain to the base of the first ring, tie and hide ends.
Chart for Rounds 2 and 3
Round 2 Begin with a ring R(4+4+4+4),
  • 1st join to the side picot of any ring of the Round 1;
  • 2nd join to the opposite chain of Round 1; and
  • 3rd join to the side picot of the next ring of Round 1.

Reverse work and make the chain C(3-3). Lock join to the middle picot of the next ring of Round 1 and repeat the chain C(3-3).

Repeat the steps until you have made the lock join to the last ring of one side of Round 1.

For the end, make C(3-6), reverse follwed by R(6+4+6), joining to the picots on each side of the rings at the end of Round 1. Lock join to the middle picot of the ring at the end of Round 1. Repeat, in reverse, for the other side.

Continue with the earlier steps for the straight side and the other end. Cut and join to the beginning.

Round 3

Round 3 are all chains with 2 double stitches separating the picots as in the chart.

Many liked this from earlier