To keep my mind active and not be thinking to much about the current situation, I have embarked on a challenge for myself. I called this my 14-day Challenge; i.e. to complete a new design in 14 days. It is a challenge for me, but you are welcome to join me and tat-along. There should be be no rush on your part.
Instructions for Day 1/14 to Day 7/14 has been posted in my Facebook page. I am now sharing this here for tatters who don't frequent facebook. I will update the coming days' instructions in Facebook and copying it here as well.
If you see some bowling appearing, you can change the chains count to (5-4-4-4-5).
That is the feedback I get on my FB page from tatters who have tatted this.
All rings are (4-4-4-4) , with joins as shown in the photo.
All chains are (4-4-4-4)
The big rings are (4-4-4-4) placing the joins as shown in the photo.
The small rings are (5-5), placing the joins as shown.
Short chain are (4-4) and long chains are (5-5)
Small rings are (6-6) joined as shown.
The slightly bigger rings are (3-3-3-3), joined as shown.
All chains are 4 counts separated by picots.
Similar counts to Day 6, but with an additional (3-3-3-3) ring for each segment.
All chains have 4ds separated by picots, as shown.
p.s. Some have asked for a detali written instructions for this. I am not going to do that at this time. It will take much longer for me to write the full instructions and will not be able to meet my challenge if I do that.
Stay safe and stay in